Embedded Software Development for Manufacturers

Firmware inside your products, and device software on your factory floor that connects to MES, ERP and AI

Zenkins is a manufacturing software development company. We build the embedded software that manufacturers depend on: firmware and device software inside products such as EV and battery systems, motor controllers, industrial equipment and electronics, and machine and edge-device software that sends plant data into your MES, ERP and AI systems. The same team builds the device software, the cloud and the integration, so the data path works end to end. We work with manufacturers in the USA, UK, Europe and Australia.

  • What it is: software that runs on a device, such as a microcontroller, controller board or edge gateway, and controls it, reads its sensors or lets it talk to other systems.
  • Two ways we help: firmware and device software inside the products you make, and machine and edge-device software on your factory floor.
  • What we build: firmware for microcontrollers, RTOS and embedded Linux software, device protocols, edge analytics, over-the-air updates and device-to-cloud connections. 
  • How it connects: device data flows to MES, ERP, quality systems and AI through gateways, brokers and APIs we build and test.
  • How we de-risk it: prototype on target hardware early, automated and hardware-in-the-loop testing where possible, and a release process with secure updates. 
  • What you get: documented source code, build and test setup, a tested update path and full ownership of the code on completion and final payment.

Custom Software • AI Engineering • Manufacturing Systems • Cloud and Data

What Is Embedded Software Development in Manufacturing?

Embedded software is the code that runs on a dedicated device: the controller in a battery pack, the firmware in a motor drive, the software on a sensor node or the program on an edge gateway beside a machine. It works close to the hardware, often with strict limits on memory, power and timing, and it has to keep working for years in the field.

For manufacturers it matters in two places. In your products, firmware decides how reliable, efficient, connected and updatable the product is. On your factory floor, device software decides whether machine data reaches your MES, ERP and analytics at all, or stays trapped in a controller nobody reads.

Embedded work sits at the base of a digital transformation programme. Dashboards, predictive maintenance and traceability all depend on devices that capture the right data and send it reliably.

Reliable products

Firmware that behaves predictably under real operating conditions, from start-up to fault handling.

Connected devices

Standard industrial and automotive protocols, so devices talk to controllers, gateways and the cloud.

Usable plant data

Machine data captured at the source and delivered to MES, ERP and analytics in a form they can use.

Products that improve after sale

Secure over-the-air updates, so you fix defects and add features without field visits.

Embedded software for your products and for your plant

Different buyers and different goals, built by one team.

 Inside your productOn your factory floor
Who it is forManufacturers building EV, battery, motor control, industrial equipment and electronics productsPlants that want machine and sensor data in their MES, ERP and AI systems
What we buildFirmware, drivers, embedded Linux applications, device communication, OTA updatesEdge gateways, machine connectors, protocol adapters, on-device analytics, data buffering
Typical devicesMicrocontrollers, SoCs, controller boards, battery management units, motor controllersPLC-connected gateways, sensor nodes, edge computers beside machines
Typical protocolsCAN, Modbus, BLE, Wi-Fi, MQTT, OPC UAOPC UA, Modbus, MQTT, vendor PLC interfaces
What it connects toYour product cloud, service tools, companion appsMES, ERP, quality systems, historians, AI services
OutcomeA product that is reliable, connected and updatableA plant where machine data is captured, trusted and used

Signs you need embedded software expertise

If three or more apply, start with a technical review.

The hardware is ready, but the firmware is late

Product launches wait on software that was planned as an afterthought.

Your firmware is hard to change

The original engineer has left, the toolchain is outdated or nobody dares touch the code.

Devices cannot connect to your systems

Machines and products run, but their data never reaches MES, ERP or the cloud.

Updates need a site visit

Fixing a defect or adding a feature means sending a technician.

Field failures are hard to diagnose

Devices fail in the field and you lack logs, diagnostics or remote visibility.

You want AI at the edge

You need inspection, anomaly detection or prediction to run on the device, not only in the cloud.

Our Embedded Software Development Services

From the first line of firmware to a tested update in the field.

Firmware development

Reliable code for microcontrollers. Firmware in C and C++ for control, sensing, power management and communication, structured for testing and long-term maintenance.

Examples: Controller firmware • Sensor and actuator drivers • Power management

RTOS and embedded Linux

The right platform for the job. Real-time operating system software for tight timing, and embedded Linux with board support packages and device drivers when you need richer functions.

Examples: RTOS task design • Board bring-up • Device drivers

Industrial and automotive protocols

Make devices talk. Implementation and integration of CAN, Modbus, OPC UA, MQTT, BLE and Wi-Fi, with robust error handling and reconnection.

Examples: CAN bus communication • Modbus connectivity • OPC UA servers and clients

Edge AI and on-device analytics

Intelligence where the data is. Inference and filtering on the device or gateway for inspection, anomaly detection and condition monitoring, with models connected to your AI and ML work.

Examples: Anomaly detection • Vibration analysis • Visual inspection at the edge

OTA updates and device-to-cloud connectivity

Keep devices current and visible. Secure update mechanisms, device provisioning, telemetry and remote diagnostics, connected to your cloud. See IoT Software Development.

Examples: Signed firmware updates • Device telemetry • Remote diagnostics

Embedded testing and code quality

Test the device, not only the code. Unit and integration testing, hardware-in-the-loop where a test rig is available, static analysis, code review and continuous integration. See QA & Software Testing.

Examples: Unit tests on target and host • Hardware-in-the-loop rigs • Static analysis

Legacy firmware modernization and porting

Move old firmware forward. Assess, refactor and port firmware to new hardware, toolchains or an RTOS, with regression testing so behaviour is preserved. See Application Modernization.

Examples: Toolchain migration • MCU porting • Refactoring for testability

Edge gateways and factory data connectors

Get machine data into the plant systems. Gateways and connectors that read PLCs and machines, buffer and normalise data, and deliver it to MES, ERP and analytics. See API Development & Integration.

Examples: Machine data capture • Protocol translation • Store-and-forward buffering

Software around the device

The rest of the product. Companion mobile and web apps, cloud back ends and dashboards that make the device useful. See Custom Software Development.

Examples: Service portal • Mobile companion app • Fleet dashboard

Not Sure Whether the Problem Is Firmware, Hardware or Integration?

Describe the device and what it needs to do. We will tell you what a technical review would cover and where the risk probably sits.

Industrial and automotive protocols we work with

Devices are only useful if they can talk to the rest of the system.

ProtocolWhere it is usedWhat we build
CANVehicles, battery and motor systems, machineryCAN communication on device firmware, message handling, diagnostics
ModbusPLCs, drives, meters and sensorsModbus client and server implementations, gateway connectors
OPC UAFactory systems and MES connectivityOPC UA servers and clients on gateways and capable devices
MQTTDevice to broker, edge to cloudMQTT clients, topic design, reconnection and buffering
BLEShort-range setup, service and companion appsBLE services for configuration and diagnostics
Wi-FiDevice connectivity in plants and sitesNetwork provisioning, secure connections, resilience

From the device to MES, ERP and AI

Why we build the whole path, not only the device.

StageWhat happensWhat we build
1. CaptureThe device or machine reads sensors, states and eventsFirmware, drivers, protocol clients
2. Edge processingData is filtered, buffered and, where useful, analysed on siteEdge software, on-device analytics, store-and-forward
3. TransportData moves securely to the plant network or cloudMQTT, OPC UA, secure connections
4. PlatformData is stored, modelled and made availableCloud and plant data services. See Data Engineering.
5. UseMES, ERP, quality and AI systems act on the dataIntegrations and dashboards. See MES solutions.

Note: Most “digital factory” projects stall at stage 1 or 2, where data capture is incomplete or unreliable. Building the device side and the integration side together removes the handover where data quality is lost. For how to capture machine data for OEE, see How to Track OEE in Real Time.

How we keep embedded software dependable

Field devices cannot be patched casually, so quality has to be built in.

PracticeWhat it means
Static analysis and coding rulesAutomated analysis in the build, with coding standards such as MISRA C where your product requires it
Unit and integration testsLogic tested on the host and on target hardware
Hardware-in-the-loop testingFirmware tested against real or simulated hardware in an automated rig
Continuous integrationEvery change built and tested automatically
TraceabilityRequirements linked to code, tests and releases
Secure updatesSigned images, version control and rollback for OTA
Security by designAuthenticated connections, protected credentials and a plan for vulnerability handling

Standards note: Products and plants carry requirements such as IEC 62443 for industrial cybersecurity, ISO 26262 for automotive functional safety and IEC 61508 for functional safety. We design and document software to support these requirements. Certification belongs to your product and your assessor, and we do not claim certification for your product.

Our embedded software development process

Prove it on real hardware early, then build in measured steps.

Discovery and hardware review

We review requirements, the hardware, constraints on memory, power and timing, interfaces and the systems the device must connect to.

Output: Requirements, risk list and technical approach.

rchitecture and platform choice

We choose between bare-metal, an RTOS or embedded Linux, define modules and interfaces and plan the update and test strategy.

Output: Architecture document.

Bring-up and prototype

We run a prototype on target or development hardware to prove the riskiest parts early: communication, timing and power.

Output: Working prototype and findings.

Firmware development

We build in two-week sprints with demos on hardware, code reviews and static analysis in the build.

Output: Tested firmware increments.

Integration

We connect the device to gateways, brokers, cloud services and your MES, ERP or applications, and test the whole data path.

Output: Integrated, end-to-end data flow.

Verification and field trial

Unit, integration and hardware-in-the-loop testing, then a field or pilot trial with logging and diagnostics.

Output: Test evidence and a trial report.

Release, OTA and support

We deliver a release with documentation and a tested update path, and support the product and its updates after launch.

Output: Release package and a support plan.

Embedded technology and tools

Platforms and tools chosen for your hardware and your product life.

Languages

C, C++, Python for tooling and test automation

Microcontrollers and SoCs

ARM Cortex-M parts and Linux-capable SoCs

Operating systems

FreeRTOS, Zephyr, embedded Linux with Yocto or Buildroot

Protocols

CAN, Modbus, OPC UA, MQTT, BLE, Wi-Fi

Cloud and device management

AWS IoT Core, Azure IoT Hub, MQTT brokers

Edge AI

TensorFlow Lite, ONNX Runtime

Build and CI

GCC, Clang, CMake, GitHub Actions, GitLab CI

Debug and test

JTAG and SWD debuggers, logic analyzers, oscilloscopes, unit test frameworks, hardware-in-the-loop rigs

Product software

.NET, Java, Python, Node.js, React, mobile apps

Embedded software across manufacturing industries

Products and plants, by sector.

Automotive & Mobility

EV and battery systems, motor controllers and charging. Typical work: device firmware, CAN communication and connected diagnostics.

Semiconductor & Electronics

Device and test-equipment software. Typical work: firmware for electronics products, test-station connectivity and data capture.

Industrial Equipment & Machinery

Machine controllers and remote monitoring. Typical work: embedded control software, OPC UA connectivity and service diagnostics.

Electrical & Energy Equipment

Power electronics and monitoring devices. Typical work: firmware, communication protocols and condition monitoring.

Chemicals & Process Manufacturing

Instruments and sensor networks. Typical work: gateway software for process data and monitoring devices.

Pharmaceuticals & Life Sciences

Monitoring and logging devices in validated environments. Typical work: data-logging firmware and device-to-system connectivity with documented, tested software. Software supports validation, and your quality team owns it.

Consumer & Industrial Products

Connected products. Typical work: product firmware, companion apps and OTA updates.

New Energy & Advanced Manufacturing

Battery, storage, inverter and charger products. Typical work: battery management firmware, CAN and Modbus communication and cloud telemetry.

Why choose Zenkins for embedded software?

One team from the device to the plant system.

We build the whole data path

Device software, gateways, cloud, integration and applications come from one team, so data quality is not lost at a handover.

Manufacturing context

We understand production workflows, quality processes and plant systems, so devices are built to feed them.

Engineered to be testable

Code is structured for automated and hardware-in-the-loop testing, with static analysis and continuous integration.

Security and updates planned from the start

Authenticated connections and signed updates are part of the design, not an add-on.

AI where it fits

We add AI to your systems when the data and the process support it, and we say so when a simpler tool is the better answer.

Why it matters: You spend on what works.

India-based engineering, global delivery

Engineering teams in Ahmedabad and Pune, two-week sprints with demos and defined overlap hours for manufacturers in North America, the UK, Europe and Australia.

Start Your Embedded Software Project

Tell us what the device does, what it runs on and what it needs to connect to. We will review it, tell you where the risks are and propose a scope and a first prototype. Our engineering teams in Ahmedabad and Pune deliver to manufacturers worldwide, with defined overlap hours for North America, the UK and Europe.

Explore Our Latest Insights

Legacy ERP Modernization

Legacy ERP: Modernize, Replace or Integrate?

Stuck with an ageing ERP? Learn when to modernize, replace or integrate your legacy ERP, with a decision framework, cost ...
Manufacturing Digital Transformation Roadmap

A Manufacturing Digital Transformation Roadmap: Where to Start

Not sure where to begin with digital transformation in manufacturing? Follow this practical roadmap: assess, digitise, connect, optimise and scale, ...
Build vs Buy Manufacturing Software

Build vs. Buy: How to Decide on Custom Manufacturing Software

Should you build custom manufacturing software or buy off-the-shelf? Compare cost, speed, fit, risk and ownership, with a 10-question framework ...

Embedded software development for manufacturers: frequently asked questions

Answers on scope, platforms, protocols, testing, standards, cost and delivery.

It is the design and programming of software that runs on a dedicated device, such as a microcontroller, controller board or edge gateway, and controls it, reads sensors or communicates with other systems. It works close to the hardware, with limits on memory, power and timing.

Embedded software runs on the device itself. IoT software is the connected layer around devices: the cloud platform, device management, dashboards and apps. Most connected products need both. We build the device side here and the platform side under IoT Software Development.

It depends on timing needs, resources and features. An RTOS suits tight real-time control on small microcontrollers. Embedded Linux suits devices that need rich networking, file systems, user interfaces or edge AI, and have the memory and processing power. Some products use both, one for real-time control and one for connectivity. We recommend an option after reviewing your requirements.

Our focus is software. We work with your hardware team or your hardware design partner, and we can review a design for software risk.

Devices send data using protocols such as OPC UA, Modbus and MQTT, usually through an edge gateway that buffers and normalises it. Integration services then deliver the data to MES, ERP, quality systems and analytics. We build both sides and test the full path. See API Development & Integration.

Yes, for suitable models. Inference on a device or gateway reduces latency and bandwidth and keeps raw data local. It depends on the model size and the hardware. We assess feasibility on your hardware first, and keep heavier models in the cloud. See AI and ML Development.

A device downloads a new firmware image from a server and installs it, with checks that it is authentic, complete and compatible, and a way to roll back if it fails. Security needs signed images, authenticated connections and protected keys. We design the update path with the device and the cloud together.

Often yes. We review the code, tools and hardware, then refactor for testability, move to a newer toolchain or port to new hardware, using regression tests to preserve behaviour. The review tells us whether to refactor, port or rewrite. See also Application Modernization.

We combine unit tests on the host and on target, integration tests, static analysis, continuous integration and, where a rig is available, hardware-in-the-loop testing against real or simulated hardware. Then we run field or pilot trials with logging. See QA & Software Testing.

We can design and document software to support these requirements where your product needs them. Certification belongs to your product and your assessor, and we do not claim certification for your product.

Cost depends on the hardware, the platform, the protocols, the update and security requirements, and the test effort.

We start with a technical review of your requirements and hardware, then a prototype on real or development hardware to prove the riskiest parts. A first prototype typically takes a few weeks, and a production firmware project usually takes several months depending on scope. Zenkins is headquartered in Ahmedabad with an engineering team in Pune, and we work with manufacturers in the USA, UK, Europe and Australia with defined overlap hours.

Scroll to Top